Thermometers with switch contacts

Wherever the process temperature has to be indicated locally and, at the same time, limit values must be monitored, thermometers with switch contacts find their application. The switch contacts make or break the circuit dependent upon the pointer position of the indicating measuring instrument. If the reading is significantly above or below a set value, they trigger an alarm, hence also the term “alarm contact”. The instruments are also suitable for starting, stopping or switching processes.

Sales contact

WIKA Instruments Ltd.

Tel.:
+44 1737 644008
Fax:
+44 1737 644403
info@wika.co.uk

FAQ

To which standard are gas actuated thermometers and bimetal thermometers manufactured?

Gas actuated thermometers and bimetal thermometers are manufactured to EN 13190. If electrical connectors are built in, DIN 16196 applies.

What is the minimum insertion length of a thermowell?

The insertion length of a thermowell will be specified through the thermometer  used. In general one can assume a length of  60-100 mm for mechanical thermometers from a minimum total length. Electrical thermometers need an insertion length of at least 35 ... More

Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.